Joyce Machine Screw Jacks Manual do Utilizador descarregar pdf (Página 7)

2-6 100 and 150-Ton Jacks

1. The assembly of the 100 and 150-ton jack varies from the smaller machine screw jacks.

The 100 and 150-ton jacks utilize a base plate and a sleeve that are shimmed and bolted

together, instead of a sleeve and sleeve cap.

2. In a translating jack, the screw (item 14) should be removed first, and then the sleeve

can be unbolted from the base.

3. In a KFTN model, the base and sleeve may be unbolted first.

4. In assembly, the pre-load for the worm shaft (item 12) is set the same as the rest of the

jacks. The pre-load for the thrust bearings (item 4) is set with the shims between the

base plate and the sleeve. Similar to the smaller machine screw jacks, this is a trial and

error process to obtain the correct pre-load. (See Section 2.5 – Assembly of Machine

Screw Jacks).

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sem comentários

Joyce Machine Screw Jacks Manual do Utilizador Página 7